CTZCC.COM
http://forums.ctzcc.com/

Prosport gauges??
http://forums.ctzcc.com/viewtopic.php?f=7&t=6941
Page 1 of 1

Author:  ZjustinZ [ Sun Jul 15, 2012 6:07 pm ]
Post subject:  Prosport gauges??

Has anybody used these gauges or heard any good/bad feedback on them?

Attachments:
Performance AmberWhite Boost Gauge 800x533.jpg
Performance AmberWhite Boost Gauge 800x533.jpg [ 193.55 KiB | Viewed 16387 times ]

Author:  Frank T [ Mon Jul 16, 2012 11:13 am ]
Post subject: 

Phrog and Bryan Little probably have more 'gauge' experience than the rest of us combined. Also Logan in Oklahoma researched a bunch of them before he installed his. There are a few others locally who have changed their gauges during restoration as well, including "Tiny" (Alan Garcia) in Bridgeport, who made his entire dashboard look like a spaceship at night.


Frank

Author:  ZjustinZ [ Mon Jul 16, 2012 12:36 pm ]
Post subject: 

Hopefully one of them could chime in on the subject with there knowledge.
They have been getting good feedback on Z31P so I think I might order some up, but still any input is appreciated!

Author:  PhrogZ46 [ Mon Jul 16, 2012 1:13 pm ]
Post subject: 

I will not recommend any gauges other than Speedhut. They're that good.

Autometers will do well in a pinch, but the revo gauges I've got are simply the creme de la creme compared to everything else I've seen.

Image
Image

My setup looks like absolute junk in the photos, but that was from mid-installation tests.


Customization of lighting and appearance to your heart's content.

www.speedhut.com

Author:  Gregmatic [ Mon Jul 16, 2012 2:50 pm ]
Post subject: 

I have prosports in my Z and have for several years (boost/vacuum and oil pressure). I think they are great and offer a more reasonably priced alternative to the Autometer, Speedhut, Etc.. Those are all great gauges and if you have the coin then by all means, but these work just fine and look great. If you will be at the meet this Sat in Middletown feel free to poke your head in to take a look.

Author:  Gregmatic [ Mon Jul 16, 2012 2:50 pm ]
Post subject: 

I have prosports in my Z and have for several years (boost/vacuum and oil pressure). I think they are great and offer a more reasonably priced alternative to the Autometer, Speedhut, Etc.. Those are all great gauges and if you have the coin then by all means, but these work just fine and look great. If you will be at the meet this Sat in Middletown feel free to poke your head in to take a look.

Author:  ZjustinZ [ Mon Jul 16, 2012 3:50 pm ]
Post subject: 

Those speedhut gauges look pretty good and come in the 2 5/8 size i want but they are a little too pricey for me atm.

I will be at the meet so I'll definitely be checkin out your setup Greg.

Author:  john.durand [ Sun Sep 09, 2012 11:54 pm ]
Post subject:  gauges

I have autometer for volts / oil / water / fuel
the fuel gauge does not work. I have 2 different ones and have'nt
been able to delve into this yet as to what the problem is. 1st, I don't think I have a stock tank. My 260 was a Canadian delivery. The tank only holds about 13 gals. I know my original 240 held 15.9. I saw somewhere british
delivery Z's had 13.2 gal. tanks. Next would be the sender. Don't know what
I have. Are there any identification nos. on fuel tanks? One thing I know is the tank bands run back to front, not side to side. This may be due to the mods done with the cage etc. I hope to get into this this winter. Last years
tremec / clutch /drive shaft / shift lever work along with carpet and travel top
work did me in. Anyone with info on fuel gauges and tanks for 240/260's?
Jack

Author:  Ragin Z [ Sun May 19, 2013 12:00 pm ]
Post subject: 

lots of QC issues with these gauges. I would stick with speedhut, autometer, stewart warner, VDO.

Author:  ZjustinZ [ Sun May 19, 2013 12:47 pm ]
Post subject: 

I've been using them in my car since last summer and have had no problems with them. Good gauges for the price :thumbs_up:

Author:  john.durand [ Sun May 19, 2013 1:22 pm ]
Post subject: 

gauges are autometer gauges, so why are you saying lots of QC issues?

Also, I never did get any answers of fuel tanks. I'm having fuel gauge issue looked at now, I know sender is sending a signal as gauge moves, albeit only between 3/4 and full. Leads me to believe gauge is wrong ohms for sender.
Jack

Author:  Ragin Z [ Sun May 19, 2013 1:30 pm ]
Post subject: 

QC was in reference to prosport. They tend to be inaccurate. The senders are junky. I was looking into them for a while and then I finally gave up.

Like someone said, they haven't had an issue, but I know people who have had issues. Mostly with gauge needle position and junk senders.

Some are good, some are bad, hence QC issues.

haven't heard that many complaints from people with AM, speedhut, DEFI, stewart warner... etc. Speedhut doesn't seem to be that expensive. You can get a whole cluster for around $800. The AM set i was looking into was over $1200.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/