CTZCC.COM http://forums.ctzcc.com/ |
|
Wtb: 240z beaver panel complete and in good shape http://forums.ctzcc.com/viewtopic.php?f=6&t=9762 |
Page 1 of 2 |
Author: | r_3 [ Tue Mar 24, 2020 3:18 am ] |
Post subject: | Wtb: 240z beaver panel complete and in good shape |
Cut from good parts car acceptable |
Author: | Frank T [ Tue Mar 24, 2020 1:05 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Good to hear from you Seth. How are the kids? I tried cutting one of those off a 1971 car with a sawZall and gave up after my second pack of blades. About 4 layers of sheetmetal join there from different directions, all folded together around the rear curves, making it a week-long project at least. If I ever have to try it again I will use a torch. |
Author: | r_3 [ Tue Mar 24, 2020 1:55 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Hey Frank, All well here with the family so far with all of the "fun" going on in the world. Yeah I imagine its a bear to get out. I've seen most people cut out the rear quarters part of them to get them out sometimes. Do you have one? |
Author: | Frank T [ Tue Mar 24, 2020 4:38 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
I don't. Are you building another one? |
Author: | r_3 [ Tue Mar 24, 2020 5:05 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
......maybe.... https://photos.app.goo.gl/iMbpnSeSb6eXQTXk7 |
Author: | Frank T [ Tue Mar 24, 2020 10:55 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Oh dear...! Once you've driven a converted LT1 you are hooked for life, I suppose. (There are better ways to hold those sugar scoops onto the fenders....) |
Author: | r_3 [ Tue Mar 24, 2020 11:01 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Haha yes I know. I was doing some test fitting and was too impatient for bolts. I went 5.3 LS this time |
Author: | Frank T [ Sun Apr 19, 2020 7:53 am ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Any luck on this yet? |
Author: | r_3 [ Sat May 02, 2020 1:25 am ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Hey Frank, Missed this message. Sorry. I ended up using what I had and putting it back into shape to the best of my abilities. So far: www.facebook.com/240zidiot |
Author: | Frank T [ Sat May 02, 2020 4:29 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
That looks right next-door to professional. Good work, keep it up. |
Author: | r_3 [ Sun May 03, 2020 10:43 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
haha, I'm trying! |
Author: | johnnyZ [ Mon May 04, 2020 2:23 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
I love your dedication to this cars future life. I sure hope you move the gas tank before welding to ensure your future life. BTW, is that a 240Z gas tank? It doesn't look like the one in my 71Z which I am intimately familiar with due to some recent fuel delivery issues I have had. . Good luck. I hope to see the completed car some day! |
Author: | r_3 [ Mon May 04, 2020 9:35 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Its a tank from an LS powered Camaro to feed the 5.3 engine that's up front |
Author: | johnnyZ [ Wed May 06, 2020 6:21 pm ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
Makes sense. Will you have to cut into the spare tire well to make it fit? |
Author: | Paul [ Sun May 10, 2020 9:57 am ] |
Post subject: | Re: Wtb: 240z beaver panel complete and in good shape |
So you know Dave up by you restoring Z's, It's a small world. I told him you were looking for that piece because he is buying a 240 parts car from me and that section is perfect. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |