CTZCC.COM
http://forums.ctzcc.com/

WTB intake manifold for triple weber/mukuni carb setup
http://forums.ctzcc.com/viewtopic.php?f=6&t=10182		 Page 1 of 1
Author:  DevinG [ Fri Jul 01, 2022 12:26 pm ]
Post subject:  WTB intake manifold for triple weber/mukuni carb setup
Hello, New to the forum with a bad case of Zcar addiction. Regards, Devin
Author:  HowardJ [ Fri Jul 01, 2022 4:41 pm ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Welcome Devon to one of the best and friendliest Z car clubs in the area. Can you tell us what your ride is and its back story (how long you've had it, what you've done to it, etc.) and your approximate location so that we can possibly inform you of potential and local resources in your area. Feel free to ask questions. :D :thumbs_up:

Howard J
Author:  HowardJ [ Fri Jul 01, 2022 4:50 pm ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Devon. Can you tell us the year and engine that the "intake manifold for triple weber/mukuni carb setup" is to go on? 2.4, 2.6 or 2.8? :? :D
Author:  johnnyZ [ Sat Jul 02, 2022 7:18 pm ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Hello Howie,

I met Devin at the Thompson Speedway last Saturday during the Vintage Racing Group's (VRG) event held there. He was racing his 240Z along with 4 or 5 other Z's that day. It was a fun day for me and my son Michael. Big Al showed up also. Devin has just gotten his "glitches" figured out on the website, so hopefully he will share some of his stories with us soon.

Cheers!
Author:  HowardJ [ Tue Jul 05, 2022 4:16 pm ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Thanks John. :thumbs_up: :)
Author:  DevinG [ Wed Jul 06, 2022 10:51 am ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Hi All,

I purchased an early small bumper 260Z with automatic last summer. I bought the car from the brother of the original owner. Car has 34K original miles and is rust free (really on both) with a super nice interior. The paint is heavily faded, but cleans up to a nice patina with polish. The engine is frozen. The previous owner had a head gasket failure and broke the water pump bolts while removing. The repair stopped there with spark plugs removed... thus the frozen motor. I have a warmed up home rebuilt L28, 5 speed and set of Weber DCOE45. Looking for an intake manifold to finish the package.

Regards,

Devin
Author:  porkbun [ Thu Jul 07, 2022 5:56 am ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Welcome Devin,

I sent you a PM :thumbs_up:
Author:  Frank T [ Sun Jul 31, 2022 9:20 pm ]
Post subject:  Re: WTB intake manifold for triple weber/mukuni carb setup
Has this been resolved or are you still looking?
Frank T

(PS: Hi Porkbun! :mrgreen: :thumbs_up: )
(Welcome, Devin! :D )
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/