CTZCC.COM http://forums.ctzcc.com/ |
|
Need Bushing Diameter http://forums.ctzcc.com/viewtopic.php?f=4&t=9566 |
Page 1 of 1 |
Author: | BFG [ Wed Dec 12, 2018 7:33 pm ] |
Post subject: | Need Bushing Diameter |
Hey guys, With my car being 3,000 miles away I don't have access to my parts for reference. Anyone know what the diameter of the Rear Inner LCA Bushing is? These are the bushings that get trapped by the rear transverse link caps. I'm trying to machine some new caps and if anyone has the outer diameter of that bushing it would be greatly appreciated. Currently running urethane bushings! Thanks! |
Author: | Frank T [ Wed Dec 12, 2018 8:42 pm ] |
Post subject: | Re: Need Bushing Diameter |
830 members in the Club, owning more than 1,000 Zs. Remind us what car you're talking about? |
Author: | BFG [ Wed Dec 12, 2018 8:58 pm ] |
Post subject: | Re: Need Bushing Diameter |
1975 280z! |
Author: | Frank T [ Thu Dec 13, 2018 1:58 am ] |
Post subject: | Re: Need Bushing Diameter |
I can call vinny tmrw. 280 suspension stuff is heftier than my 240 stuff. |
Author: | BFG [ Wed Dec 19, 2018 4:34 pm ] |
Post subject: | Re: Need Bushing Diameter |
Anyone have a set of not installed urethane bushings they're willing to take a measurement of? Thanks! |
Author: | Frank T [ Wed Dec 19, 2018 8:07 pm ] |
Post subject: | Re: Need Bushing Diameter |
Shoot! I couldn't get Vinny on the phone and then I completely forgot about this in the holiday rush. I apologiZe to you. You could call your local Nissan dealer parts desk and ask them. They have all the fiche from the Z cars. You might have to spend a while on the phone with them, but it will be quicker than waiting for me to catch Vinny at the shop on the holidays. You should know your VIN or manufacture date in case they ask. |
Author: | BFG [ Thu Dec 20, 2018 4:16 pm ] |
Post subject: | Re: Need Bushing Diameter |
I'll be heading back home for the holidays this week so I can see if I can grab the dimension off my car. If not I'll start calling people. Thanks for the heads up! |
Author: | BFG [ Wed Jan 02, 2019 3:22 pm ] |
Post subject: | Re: Need Bushing Diameter |
Using a fairly crude way of measuring I'm pretty confident the diameter is 40mm. |
Author: | Paul [ Mon Apr 01, 2019 5:56 am ] |
Post subject: | Re: Need Bushing Diameter |
Just saw this, if you still need, I have a set of solid bushings I can measure for you. They were in my 240, so I know they fit.....................defiantly not for street. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |