CTZCC.COM http://forums.ctzcc.com/ |
|
I’m a trained professional don’t try this at home http://forums.ctzcc.com/viewtopic.php?f=4&t=9408 |
Page 1 of 1 |
Author: | HowardJ [ Tue Apr 10, 2018 5:36 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Holy (holey ) moly. Definitely a Flintstonemobile issue, requiring knowledgeable attention. Remember to add temporary bracing to hold body in proper alignment before cutting out/replacing any structural metal supports to prevent twisting. I wish you luck and success. |
Author: | SurferD [ Wed Apr 11, 2018 2:59 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Thanks Howard the front and rear edges of the pans are pretty much gone. I have plenty of bracing but I'm doing one side at a time and may not need it. I will need a straightedge setup when doing the inner/outer rockers. |
Author: | HowardJ [ Wed Apr 11, 2018 6:18 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Author: | Frank T [ Wed Apr 11, 2018 6:27 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Remember our member John who owns BadDog Parts in Mass; he makes entire floorpan and rail assemblies. Let me know if you forgot how to reach him. |
Author: | SurferD [ Wed Apr 11, 2018 8:04 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Frank T wrote: Remember our member John who owns BadDog Parts in Mass; he makes entire floorpan and rail assemblies. Let me know if you forgot how to reach him. I got the Zedd Findings floors/rails already. I thought he did just rails. I actually like his rails better than Charlie's. |
Author: | alllan71 [ Sun Apr 15, 2018 11:24 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Same here; Zedd pans and Bad Dog rails... |
Author: | FM6 [ Wed Aug 15, 2018 3:22 pm ] |
Post subject: | Re: I’m a trained professional don’t try this at home |
Nice to hear from you Rich and good progress |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |