CTZCC.COM
http://forums.ctzcc.com/

poly bushings for TC rods
http://forums.ctzcc.com/viewtopic.php?f=4&t=9051		 Page 1 of 1
Author:  SurferD [ Wed Aug 31, 2016 4:33 pm ]
Post subject:  poly bushings for TC rods
My rubber bushings, while only about a year old, are severly cracked.
I decided to go with poly as all the other stuff on the car has been upgraded with the same.
I got them yesterday then I read poly in the TC's aren't good as they don't provide enough flex and may break the rods.
Over on hybridZ a guy said to modify them by drilling six holes to give them more flex.
So I had one of my guys in the machine shop make some 1/4" holes.
they are definitely more springy now and I don't think I'll have any problems.
The only thing is they are thicker than stock and will need to be compressed with my 16" adjustable pliers.
I hope I have enough hands to put them in.
Image
Author:  Frank T [ Wed Aug 31, 2016 8:45 pm ]
Post subject:  Re: poly bushings for TC rods
Got any C-clamps laying around?
Author:  SurferD [ Thu Sep 01, 2016 1:16 pm ]
Post subject:  Re: poly bushings for TC rods
Of course I do good idea
Author:  jim.arnett [ Fri Sep 02, 2016 2:52 pm ]
Post subject:  Re: poly bushings for TC rods
Frank T wrote:
Got any C-clamps laying around?


Works every time! :thumbs_up:
Author:  SurferD [ Sat Sep 03, 2016 7:41 am ]
Post subject:  Re: poly bushings for TC rods
I didn't end up needing the clamps. They went on easily.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/