CTZCC.COM http://forums.ctzcc.com/ |
|
350Z Throttle Body Motor Hum http://forums.ctzcc.com/viewtopic.php?f=4&t=8680 |
Page 1 of 1 |
Author: | philsz [ Mon Jun 08, 2015 11:04 am ] |
Post subject: | 350Z Throttle Body Motor Hum |
Electronic hum coming from the throttle body motor when the ignition switch is turned on and the car is in gear. Goes away in neutral. I hear it before the engine is started - not sure if it is there with the engine running. Does this sound like a throttle motor going bad??? Think I can trust the old "if it ain't broke don't fix it" approach, or do I need to get on this before I get stranded somewhere? Too bad the 350 doesn't use the bulletproof throttle body and linkage on my old 280ZX!!!! |
Author: | Frank T [ Mon Jun 22, 2015 11:46 pm ] |
Post subject: | Re: 350Z Throttle Body Motor Hum |
Wow, that almost defies physics, doesn't it? Goes away in neutral?! Have you 100% isolated it to the throttle body motor? Can you use the screwdriver-to-the-ear thing and specifically guarantee it's coming from there? And your gearbox is standard, right? |
Author: | philsz [ Tue Jun 23, 2015 12:42 pm ] |
Post subject: | Re: 350Z Throttle Body Motor Hum |
I used a stethoscope probe to isolate the source. Definitely the throttle motor, and the car is manual. Found a thread on the 350Z club that had several sources indicating that this is "normal" on the 350. Sounded less normal and more like a voltage leak to me. Anyway, let's hope the other guys are correct. Yet another indication of how ridiculously complex these cars have become. |
Author: | Frank T [ Tue Jun 23, 2015 2:43 pm ] |
Post subject: | Re: 350Z Throttle Body Motor Hum |
Hmmm.... I understand all is well and you don't have a problem, but I find it fascinating that it only does it while in-gear. Do you know why it hums in the first place? I mean, what's it doing when it makes that noise, which it doesn't have to do in neutral? Just curious. |
Author: | philsz [ Fri Jun 26, 2015 2:12 pm ] |
Post subject: | Re: 350Z Throttle Body Motor Hum |
And the answer is............................ The throttle body is controlled from the ECU by a PWM - Pulse Width Modulation - a signal that can emit a high frequency noise in electric motors. Normal and just another thing to go bad one day. Wish it used my 280's lever linkage instead! Operated more smoothly - deadly reliable. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |