when car was modified, new auto meter gauges were installed
(tach & speedo orig) .... the one in car now was installed just b4 I
bought it replacing another autometer gauge. neither work
I believe I have original tank (visually seems right) but capacity seems
off, low. I'm assuming OEM sending unit. Gauge goes to full and doesn't
move down below 3/4. When I took delivery I ran car out of gas in drive
way thinking was almost full, put a couple gals. in it and went to fill up and
only took 11+. My memory says OEM tank should hold 15.9.

Anyone had experience with this?

Jack Durand

_________________
John D .... original 240 past, 260v8Roadster current