CTZCC.COM
http://forums.ctzcc.com/

Allow me to reintroduce myself....
http://forums.ctzcc.com/viewtopic.php?f=3&t=7356
Page 17 of 18

Author:  Filipe [ Tue Feb 02, 2016 6:38 pm ]
Post subject:  Re: Allow me to reintroduce myself....

amen...the ole boy gets to stay in the garage...tried bringing home a mistress, apparently she isn't good enough. :lol:

z31 will be my "modified toy", the z34 will remain a fairly stock daily driver for a few years. has a very young 32,xxx miles.

Author:  FM6 [ Wed Feb 03, 2016 11:18 am ]
Post subject:  Re: Allow me to reintroduce myself....

Welcome back Filipe, glad to see that Jim was able to recover your posts.
Sounds like a great new Z as well.

Author:  Filipe [ Sat Feb 06, 2016 3:32 pm ]
Post subject:  Re: Allow me to reintroduce myself....

haven't been recovered yet. hopefully soon!

Author:  jhagani [ Wed Feb 17, 2016 6:09 am ]
Post subject:  Re: Allow me to reintroduce myself....

Hang in there, Filipe!

I'm making progress! I was finally able to get your original posts restored, but there's still work for me to do...hopefully another week or so and I'll have it 100%!

- Jim

Author:  Frank T [ Wed Feb 17, 2016 8:52 am ]
Post subject:  Re: Allow me to reintroduce myself....

:wink: :thumbs_up:
Welcome back, Filipe.
Now don't touch any more buttons. :lol:

Author:  Filipe [ Wed Feb 17, 2016 8:56 pm ]
Post subject:  Re: Allow me to reintroduce myself....

Deal!

Author:  Filipe [ Tue Mar 29, 2016 8:28 am ]
Post subject:  Re: Allow me to reintroduce myself....

It's been a good while since I've posted any sort of update here, so here goes:

In the last year and a half or so, I've found my vacuum leak (inside the cabin, under the dash), changed my o2 sensor (be careful with the O2 bung adapter in the manifold), changed transmission, differential and brake fluid; installed polyurethane rear end links and sway bar mounts, and a new battery (now sitting on a tender in my garage). I also ran the codes on my ECU - that was interesting.

For the most part I've just been ordering a bunch of parts. Coilovers, steering knuckles, front mount intercooler, short throw shifter, SS brake lines, list goes on. After I graduate this spring, there should be a lot of changes. I'm also looking into having the transmission rebuilt at capitol transmissions in Hartford.

Author:  Frank T [ Tue Mar 29, 2016 8:32 am ]
Post subject:  Re: Allow me to reintroduce myself....

What's wrong with the gearbox now?

Author:  Filipe [ Tue Mar 29, 2016 1:22 pm ]
Post subject:  Re: Allow me to reintroduce myself....

Gearbox has always been notchy since I bought it. It's gotten progressively whiny, and sometimes 1st, 2nd and reverse doesn't go in. The Borg Warner T5 is well know for acquiring bad synchros, so it might be something as simple as that.

Author:  Filipe [ Fri Apr 01, 2016 7:00 am ]
Post subject:  Re: Allow me to reintroduce myself....

One of the rewarding and cheap mods I've done thus far on the Z31 is the installation of the poly urethane tidbits. I recently did the rear sway bar end links, and gave the sway bar a refresher as well. My mentality is that if I have to take it off and put it back on, I might as well make it pertty! :lol:

Attachments:
File comment: Driver's Rear Before
DSC_0450.JPG
DSC_0450.JPG [ 96.2 KiB | Viewed 10881 times ]
File comment: Passenger's Rear Before
DSC_0452.JPG
DSC_0452.JPG [ 96.71 KiB | Viewed 10881 times ]
File comment: Existing Conditions
DSC_0457.JPG
DSC_0457.JPG [ 103.45 KiB | Viewed 10881 times ]
File comment: Mounts Painted
DSC_0486.JPG
DSC_0486.JPG [ 133.54 KiB | Viewed 10881 times ]
File comment: Sway bar sanded and prepped for paint
DSC_0487.JPG
DSC_0487.JPG [ 97.88 KiB | Viewed 10881 times ]
File comment: All painted! Don't ask why I placed it on asphalt after :/
DSC_0492.JPG
DSC_0492.JPG [ 86.4 KiB | Viewed 10881 times ]
File comment: The new end links!
DSC_0493.JPG
DSC_0493.JPG [ 104.57 KiB | Viewed 10881 times ]
File comment: Rear left after
DSC_0496.JPG
DSC_0496.JPG [ 97.51 KiB | Viewed 10881 times ]
File comment: Rear right after
DSC_0497.JPG
DSC_0497.JPG [ 101.61 KiB | Viewed 10881 times ]

Author:  Filipe [ Wed Jun 01, 2016 9:55 pm ]
Post subject:  Re: Allow me to reintroduce myself....

This Z is almost back together...*almost*. I need to push the pistons back in on the rear calipers, and change the oil, then give it a whirl. I'm not sure if I posted what went wrong with it, but I'll make a nice post when I get it all fixed up. (Hopefully this weekend!)

Attachments:
IMG_20160531_062346051_HDR-1.jpg
IMG_20160531_062346051_HDR-1.jpg [ 128.07 KiB | Viewed 10758 times ]

Author:  Frank T [ Wed Jun 01, 2016 11:32 pm ]
Post subject:  Re: Allow me to reintroduce myself....

:shock:

Is that a tree stump holding your gearbox up? :|

Author:  Filipe [ Thu Jun 02, 2016 5:54 pm ]
Post subject:  Re: Allow me to reintroduce myself....

No, that's the tree stump that I'm going to tell my grandkids about if my jack stands ever fail on me. It's placed under one of the frame rails as a "safety".

Author:  Frank T [ Thu Jun 02, 2016 7:51 pm ]
Post subject:  Re: Allow me to reintroduce myself....

8) :thumbs_up:

Author:  Filipe [ Fri Jun 03, 2016 9:32 pm ]
Post subject:  Re: Allow me to reintroduce myself....

Not without personal injury, or some of my best "french" to date, but ‪#‎RandyThe84ZXT‬ is back on all fours. Oil change tomorrow, dropping the battery back in, and hopefully going for a spin. :mrgreen:

**NOW ACCEPTING BETS ON WHAT PIECES FALL OFF FIRST** :lol:

Attachments:
IMG_20160603_222153860.jpg
IMG_20160603_222153860.jpg [ 140.4 KiB | Viewed 10737 times ]

Page 17 of 18 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/