CTZCC.COM http://forums.ctzcc.com/ |
|
280Z seats in a '71 240Z http://forums.ctzcc.com/viewtopic.php?f=15&t=8705 |
Page 1 of 1 |
Author: | LI71Z [ Sat Jul 04, 2015 12:02 pm ] |
Post subject: | 280Z seats in a '71 240Z |
Are there any problems in fitting 280Z seats in a '72 240Z? I plan to remove a set of Recaros which are just too wide for the car and replace them with some re-covered 280Z seats. The Recaros were installed by a former owner and are difficult for my wife to adjust. Thanks. |
Author: | ZCARNUT [ Sun Jul 05, 2015 1:25 pm ] |
Post subject: | Re: 280Z seats in a '71 240Z |
You must change the mounting rails, 240 is different from 280. Other than that a perfect fit. |
Author: | alllan71 [ Mon Oct 05, 2015 8:23 pm ] |
Post subject: | Re: 280Z seats in a '71 240Z |
Do you still have the Recaros? Al |
Author: | LI71Z [ Tue Oct 06, 2015 7:10 am ] |
Post subject: | Re: 280Z seats in a '71 240Z |
The Recaros are still in the car and I probably won't make any changes until early next year (still negotiating with the wife about leaving them in the car) |
Author: | alllan71 [ Tue Oct 06, 2015 8:49 am ] |
Post subject: | Re: 280Z seats in a '71 240Z |
Cool that she gets to drive it. Might be in Westbury 10/14,would'nt mind checking them out anyway. Al |
Author: | LI71Z [ Tue Oct 06, 2015 12:51 pm ] |
Post subject: | Re: 280Z seats in a '71 240Z |
We expect to at home on 10/14. Give us a ring when in the area to be sure (516) 922-9218. I need to note that the drivers seat has several rips in the left bolster's grey fabric; the rest of the seats look OK. |
Author: | alllan71 [ Wed Oct 07, 2015 12:46 am ] |
Post subject: | Re: 280Z seats in a '71 240Z |
Change of plans; won't be in Westbury (Joe Walsh) that nite, opted for the 10/8 show in Port Chester. However, you may consider a road trip to CTZCC's last monthly meeting of the zeason that evening at Miller Nissan in Fairfield,Ct. If you've been following the Doing it in a Datsun thread in 'General Z Discussion' that guy doing the one lap of America thing might be there. Just sayin'. Al |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |