Thanks Frank, I will contact him today.
| CTZCC.COM http://forums.ctzcc.com/ |
|
| Fuel line replacement http://forums.ctzcc.com/viewtopic.php?f=15&t=8240 |
Page 1 of 1 |
| Author: | FM6 [ Tue Apr 22, 2014 11:22 am ] |
| Post subject: | Fuel line replacement |
Going through and replacing the non metallic fuel lines in my 280z and I have not been able to find replacement for the lines back by the fuel tank that feed the electric fuel pump going into the fuel damper. The feed line from the tank (which is larger then 5/16 with a 90 bend in it) and the line from the top of the pump to the fuel damper ( 5/16 with a 90 bend) are no longer available. I was able to replace all of the straight sections with high pressure fuel line available anywhere. Looks like it will kink if it isn't pre-bent. I am thinking there must be something similar so I figured I would ask and save some searching time. |
|
| Author: | FM6 [ Thu Jun 26, 2014 9:07 pm ] |
| Post subject: | Re: Fuel line replacement |
Does anyone have access to a fuel tank for a 75 280z to measure the size of the outlet tube ? I also need to know the inlet tube size of the electric fuel pump. I think this one is low pressure. I have found one of the other 2 on line with the help of Courtesy Nissan in TX. They ran down a part for me today. |
|
| Author: | Frank T [ Fri Jun 27, 2014 12:52 am ] |
| Post subject: | Re: Fuel line replacement |
You could ask Vinny Bedini where he gets pre-formed fuel lines for the S30 cars. He swaps out lots of tanks. 860.355.182nine. |
|
| Author: | FM6 [ Fri Jun 27, 2014 7:36 am ] |
| Post subject: | Re: Fuel line replacement |
Thanks Frank, I will contact him today.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|